© 2025 The Glasses and The Filters | All Rights Reserved |
Designed & Maintained by The Glasses and The Filters
An MGF is used in water and wastewater treatment to remove suspended solids, dust and dirt present in the water. The MGF is a depth filter that makes use of coarse and fine media to create pore dimensions that retain large and small suspended particles. These filters work at high velocities and have high dirt holding capacity. These MGFs are used for pre-treatment in ion exchangers (deionizer and softener) and membrane filtration systems.
Dual media filter (DMF) for the removal of suspended solids and turbidity in water and wastewater. The filter uses layers of sand and anthracite or activated carbon as the media in a single container. DMFs are ideal to filter water with very fine suspended matter like mud, dust particles and biological growth at a high rate of flow. A DMF performs better than the single filtration process.
Pressure sand filter – PSF. These filters have multiple layers of sand of varied size and specific gravity. The PSF is designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. PSFs operate at lower velocities compared to MGFs.
Activated carbon filters - ACF, for varied applications to meet specific process requirements. The activated carbon filter (ACF) works on the principle of adsorption. The medium adsorbs or reacts with pollutant molecules as the water is filtered through. ACFs are designed to remove free chlorine, organic matter, odour and colour present in raw water and wastewater. The filter consists of various grades of carbon granules supported by gravel, pebble and sand. Grades of carbon are used according to the type of treatment required. The activated carbon has the optimum iodine value for effective removal of contaminants. Our ACFs are used as second stage filtration post MGF/PSF in effluent, sewage, water treatment plants, ETP, STP, WTP.
We make ion exchange softeners for several industry groups. Calcium (Ca2+) and Magnesium (Mg2+) are two of the salts/minerals that are responsible for hardness in water. The ions of these minerals/salts cause scaling of pipes and equipment, change the taste of water and are a primary problem to the laundry process. Water softeners containing resin beads (ion exchangers), designed to exchange Ca2+ and Mg2+ ions with sodium ions.
Reverse osmosis is water purification process in which pre-treated & filtered water is connected to the high-pressure pump where pressure is developed and fed to the RO membranes. Reverse Osmosis membranes work on the Cross-flow Filtration method where the salts get rejected partially and deliver pure water. Purified water is referred to as product and waste water is referred to as concentrate or reject. The percent of water delivered as product is called the recovery. The ratio of recovery& output parameters depend upon the feed water quality, type of membrane, temperature and total RO unit design considerations.
Electrodeionization (EDI) is used after reverse osmosis for polishing of demineralized water to obtain low levels of conductivity and silica. The EDI uses ion exchange membranes, ion exchange resins and electricity to produce high-quality water with no regeneration downtime. EDI is an alternative to a conventional mixed bed polisher.
Typical applications for EDI are boiler feedwater at heat and power plants, process water within the electronic industry, the pharmaceutical industry, hospitals, dye industries and laboratories .
Ultrafiltration, often abbreviated as UF, is a hollow-fibre membrane-based separation process used in water treatment. It's a type of filtration that uses a semi-permeable membrane with very fine pores to separate water from suspended solids, colloids, and high molecular weight substances.
Ultra filtration is a unique pressure-driven physical separation process in which the water is passed through porous (partially permeable) membranes with pore sizes in the range of 0.1 to 0.01 micron.These membranes are in the form of long hollow fibers. The result is high pure water free from physical and biological contaminations.
The Sewage Treatment Plant process is similar to the way that a Septic Tank works but mechanical components provide a process to help break down solids to produce a cleaner, more environmentally friendly effluent.
Combined sewage contain various biological impurities, are fed into the primary settlement tank where solids and liquids separate and the liquor flows into the aeration chamber. In the chamber, a surface aerator or diffuser aerator infuse air and oxygen to the waste and encourages good bacteria to digest the organic matter, breaking it down and purifying it.As it leaves the final chamber known as the settling chamber, the effluent is typically 95% clean and ready for discharge into local watercourses, ditches or land drainage systems, subject to consent by the Environment Agency.
Effluent Treatment plant is used for Treating waste Water coming out from different manufacturing process, where fresh water comes in contact with different types of chemicals and materials used for Processing the raw materials and get converted into the polluted water. Untreated waste Water is hazardous for the environment and need to proper treatment before discharge.
Industries during the manufacturing process generates huge quantity of high toxic effluents which yield very high BOD, COD, TS and TDS level with collared and odour in effluent.
High-Quality Materials, Innovative Technology and Custom-Tailored Designs. We use premium materials for durability and long-lasting performance. Advanced filtration, automation, and eco-friendly pool solutions. Unique and creative pool designs that match your style and requirements.
Glass, an inorganic solid material that is usually transparent or translucent as well as hard, brittle, and impervious to the natural elements. Glass has been made into practical and decorative objects since ancient times, and it is still very important in applications as disparate as building construction, housewares, and telecommunications. It is made by cooling molten ingredients such as silica sand with sufficient rapidity to prevent the formation of visible crystals.
Balcony and Staircase Railings
Moreover, the design of a balcony and Staircase railing plays a crucial role in the overall look of your home. Therefore, we offer customizable railing options that blend with contemporary or traditional themes. In addition, choose from a variety of hardware finishes like brushed steel, matte black, or polished chrome. As a result, each balcony railing is tailored to your preferences, ensuring that it feels like a seamless extension of your home’s identity. Glass railing is simple to install while giving optimal security. They are resistant to severe winds and accidental falls, as well as adverse weather. It should be a design element that elevates your lifestyle. The glass railings are easy to maintain as they do not rot, rust, or decay. The extensive use of glass railing systems may be attributed to its stylistic flexibility, diversity, and ease of installation.
The Slim Partition Series from The Glasses And The Filters offers elegant and functional solutions for dividing interior spaces while maintaining a sense of openness and light. These slim aluminium-framed glass partitions are ideal for modern office environments, coworking spaces, and high-end residential interiors.
Our shower glass enclosure boasts a sleek and seamless design, adding a touch of modernity and sophistication to any bathroom. Its frameless construction creates a clean and open ambiance, making your bathroom feel more spacious and inviting with our shower cubical.
Mirror light design is transforming home interiors by combining functionality with sophisticated style. From understated elegance to bold, glamorous lighting, this trend offers something for every taste. The light ideas to find the perfect fit for your home’s aesthetic and lighting needs.